Quick answerBuildSpace360 takes up a built-in wardrobe in Saket, Indore, which is a residential colony area. Typical projects here include flats, independent houses and villas.
A common mid-range rate is Rs 1,300 to Rs 2,000 per sq ft of front area, reviewed 14 Nov 2026. Taxes are extra and the final price is an itemised quotation after a site visit.
Indicative rates
| Item | Indicative rate | What it covers |
|---|
| Basic laminate wardrobe | Rs 900 to 1,300 per sq ft | Commercial or BWR plywood, standard hardware |
| Standard wardrobe | Rs 1,300 to 2,000 per sq ft | BWP or HDHMR, soft-close |
| Premium wardrobe | Rs 2,000 to 3,200 per sq ft | Acrylic, veneer or PU, premium hardware |
| Sliding door system | Rs 300 to 900 per sq ft extra | Profile and glass dependent |
| Loft above wardrobe | Rs 500 to 900 per sq ft | Counted on the loft front |
| Internal accessories | Priced per item | Pull-outs, tie racks, trouser racks |
Indore rates reviewed 14 Nov 2026. Indicative and tentative; taxes extra.
Working in Saket
In residential colonies and societies, working hours and debris handling are usually set by the society or neighbours, so we confirm these before work starts.
Share your layout, photos and rough budget on WhatsApp before a site visit. We send an itemised quotation after understanding your scope.
What to expect in Saket
- Residential colonies usually have rules about working hours and debris disposal, so confirm these with the society or neighbours first.
- Independent houses and flats in the same colony can need different approaches, for example terrace waterproofing for houses and bathroom work for flats.
- Planning the order of trades avoids repeated dust and breakage in a home you are living in.
These are general planning points, not a promise about any one building. The site visit confirms what applies to yours.
Wardrobe and carpentry by building type
Flats and apartments
In flats, wardrobes are measured by front area, and sliding doors save floor space in smaller bedrooms.
Independent houses and villas
In houses, walk-in or full-wall wardrobes are common. Plan loft height and internal accessories at the start.
Example budgets for a built-in wardrobe
| Example | Indicative range (before taxes) |
|---|
| a 6x6 ft wardrobe | Rs 46,800 to Rs 72,000 |
| a 6x8 ft wardrobe | Rs 62,400 to Rs 96,000 |
| a 6x10 ft wardrobe | Rs 78,000 to Rs 1,20,000 |
| a full-wall 8x10 ft wardrobe | Rs 1,04,000 to Rs 1,60,000 |
Based on the mid-range rate of Rs 1,300 to 2,000 per sq ft of front area. Indicative and tentative; the final price is an itemised quotation after a site visit.
Included and not included
Usually included
- Carcass, shutters and standard hardware
- Installation and finishing
- Basic shelves and hanging rod
- Cleaning
Usually separate
- Loft unless listed
- Lighting and mirrors
- Extra internal accessories
- GST
Before you compare quotes
- Compare quotes on the same scope, the same brand and the same measurement basis.
- Ask for an item-wise quotation and a list of exclusions in writing.
- Confirm how changes during work are priced and approved before work starts.
What changes the price
- Front area: wardrobes are priced on the front face in sq ft, so measure that, not the floor.
- Board: commercial plywood, BWP, HDHMR and MDF differ in strength and moisture behaviour.
- Finish: laminate, acrylic, veneer and PU are different price bands.
- Hardware and accessories: pull-outs and soft-close fittings add to the total.
Get a quotation for a built-in wardrobe in Saket
Share your mobile number and the locality. We call back to understand the scope and book a site visit.
Frequently asked questions
Do you take up a built-in wardrobe in Saket?
Yes. BuildSpace360 takes up a built-in wardrobe in Saket, Indore, as a single trade or as part of a full project. Share your layout and photos on WhatsApp and we confirm the scope.
What is the typical cost of a built-in wardrobe in Saket?
A common mid-range figure is Rs 1,300 to Rs 2,000 per sq ft of front area, before taxes. The final price depends on the site and finish, and is given as an itemised quotation.
Are there any access or timing rules in Saket?
In residential colonies and societies, working hours and debris handling are usually set by the society or neighbours, so we confirm these before work starts.
How long does it take in Saket?
About 3 to 4 weeks for fabrication and 2 to 3 days to install.
Do you show projects completed in Saket?
Real project photos and details are added to our Projects page as each project is documented. We do not publish reviews or project claims that we cannot show.
